|
| 1€ - 31,65 грн. |

Travertine

Finitura Strato

Decorative translucent blue, with a wide range of pearlescent effects.

Field of application: surface Finish of walls, ceilings and decorative elements of interior, can be used in rooms with high humidity levels (except for places of constant direct exposure to water). Is spectacular toning and a protective layer for decorative plasters “Pietra”, “Pietra Lucidа” (TM Ferrara Рaint) can be used as an independent coating that is applied to the background paint “Fondo Ferrara” (TM Ferrara Рaint), and also as a topcoat for other decorative plasters.

 

Packaging l

St-th/pack, Euro

St-t/l,.

the Average discharge m2/l

St-th m2.

Finitura Strato

1*

22

22

12

1,83

5

110

22

12

1,83

* Packing 1 liter is not a factory, the cost of the material is not taken into account, the price for the container

Base P, AU, AR, DC, Opaco

read more

Surface Preparation: surface on which to apply the material should be dry and not dusty. On highly absorbent surfaces (plaster, lime, etc.) recommended to use the tool of deep penetration with reinforcing properties “Penetrazione Adesivo” (TM Ferrara Рaint) method of application, see the TI Penetrazione Adesivo

Application: Applied as a separate coating: dried background paint “Fondo Ferrara” (TM Ferrara Рaint) apply “Finitura Strato” forming a desired pattern. Drawing depends on the tool. The number of layers is unlimited. Perfect decorative effect is achieved by the overlay of one color to another, or a combination thereof at the time of application, etc.
Application as a decorative layer on the embossed plaster Method of application of the material and its dilution with water is determined by the master, depending on the desired effect.

Add water: the product is ready for use, if necessary dilute with water, but not more than 150%. The amount of added water is determined by the master, depending on the desired degree of viscosity for the particular method of applying, used tool and wishful effect.

Used tools: brush, roller, swab, sponge, brush “1000 lines”, putty knife, trowel, stainless steel or plastic, different tool for creating decorative effects.

Drying Time: the coating is dry on the surface – 2-12 hours depending on layer complete the process of polymerization of the film of not less than 7 days at a temperature of at least +5°C.

Material: 6 to 15 m2/l depending on method of application.

 

Penetrazione Adesivo

Glubokopronikayuschaya a means to improve the adhesion and fixing of a surface

Scope: is used as a tonic leveling the absorbency of the surface for lime decorative plaster TM Ferrara Рaint. Can also be used as a primer of deep penetration for different mineral surfaces indoors and outdoors.

 

Packaging l

St-th/pack, Euro

St-t/l,.

the Average discharge m2/l

St-th m2.

Penetrazione Adesivo

1

10

10

50

0,20

5

45

9

50

0,18

read more

Application: with roller, brush, compressor

Dilution water: for strongly-absorbing gypsum surface, lime plasters dilution of 1:4 with water. For normal absorbing, porous surfaces dilution 1:3 with water. Concrete surface dilution of 1:2 with water.

Instrument Used: roller, brush.

Drying Time: 6-12 hours.

Material: 30-50 m2/l depending on the absorption surface.

 

Pietra Media

Natural decorative plaster based on lime with marble fillers, using which you can achieve different effects, and simulate rock and stone slices.

Scope: surface Finish of walls, ceilings and decorative elements inside.

 

Packaging l

St-th/pack, Euro

St-t/l,.

the Average discharge m2/l

St-th m2.

Pietra Media

1*

3,47

3,47

1

3,47

15

52

3,47

1

3,47

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface Preparation: the surface must be solid, not dusty, not crumbling. The quality of surface preparation is determined by the selected technology application and the used base material.

Application: see TS Pietra

Add water: the product is ready for use, if necessary dilute with water, but not more than 5%. The amount of added water is determined by the master, it depends on the necessary degree of viscosity for the particular method of applying, used tool and wishful effect.

Instrument Used: trowel stainless steel or plastic, brush brush.

Drying Time: 4 – 12 hours depending on layer thickness

Material: 0,5 – 1,5 m2/kg depending on the method of application of the material.

 

Primer quarzo

Quartz deliciousruby pigmented primer based on acrylic

Scope: is the basis for lime decorative plaster TM Ferrara Рaint.

 

Packaging l

St-th/pack, Euro

St-t/l,.

the Average discharge m2/l

St-th m2.

Primer quarzo

1*

9

9

12

0,75

5

45

9

12

0,75

10

80

8

12

0,67

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface Preparation: the surface must be solid, level, smooth, not dusty, not crumbling. As a material for surface preparation it is recommended to use a quality finishing putty.

Application: the prepared surface using roller, brush or compressor of the at least two layers.