Pietra Lucida 14kg
— Decorative lime-base…
— For interior and ext…
— VOC FREE, APEO FREE…
Natural decorative lime-based plaster, using which you can achieve the different effects and also form up a stone surface.
Field of application: surface decoration of walls, ceilings and elements of the interior decoration.
Surface preparation: The quality of surface preparation is determined by selected technique of application.
Applying: apply one layer of plaster Pietra Lucida (ТМ Ferrara Рaint) on prepared surface with steady absorb ability using a metallic float, roller. After drying apply second thin layer of material with a metallic float, polishing it in wet state. The degree of glaze will increase on the surface subject to the quality of polish. It is necessary to apply and push the second layer 2 times when it is wet, polishing it during drying to achieve the natural deep glaze of the surface.
When you use Pietra Lucida as a polishing layer with plasters Pietra apply 1-2 layers with float made from steel subject to wishful effect and degree of base smoothness. On smooth base the material can be applied with roller, polishing during drying. The material is diluted with water 15-25% beforehand.
The temperature for application: apply in temperature range from +5 to +30 ̊C and relative humidity not more than 80%.
Dilution with water: the product is ready to use, if necessary, it can be diluted with water. The quantity of added water is determined by master, according to the necessary viscosity of the material for a specific method of applying, used tool and wishful effect.
Using instruments: float made from steel, roller, brush, applicator.
Time of drying: 4-12 hours, it depends on layer thickness.
Conditions of exploiting: the finishing layer determines the endurance of this coating.
Expense of the material: 2 – 5 m2/kg according to the method of applying.
Colours: It is coloured by pigments in wishful shades according to colour palette.
Shelf life and storage conditions: store in branded packing at temperature from + 5 to +35 °С – 12 months from the manufactured date. Product should not be exposed to direct sunlight. The manufactured date and lot number are specified on the packing.
Ingredients: water, lime, mineral and marble fillers, special natural additives.
Product code: 20.30.11
Certificate of state registration: TU U 20.3-38092260-001: 2012
Manufacturer: Ltd «Ferrara Group»
Labor protection: the product is not classified as dangerous. See the hygienic conclusion № 05.03.02-04/121216 from 07.12.12, examination protocol № 11376 from 03.12.12. It doesn’t contain as heavy metals as chromium and lead, and also tactful, aromatic, chlorinated solvents. A dangerous for health polymerization is not observed. Keep away from children. In case of eyes contact, rinse immediately with water. Do not allow to enter into sewerage system, reservoirs and soil.